Buy caption-youngnails.be ?
We are moving the project
caption-youngnails.be .
Are you interested in purchasing the domain
caption-youngnails.be ?
domain@kv-gmbh.de · 0541-91531010
Buy caption-youngnails.be ?
SB Acoustics Satori MW19TX / TeXtreme
The SB Acoustics SATORI MW19TX 8 inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 30 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features: Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Specifications 4 Ohm version: Nominal impedance 4 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 3.4 Ω Voice coil inductance, Le 0.14 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.6 mm Air gap height 6 mm Linear coil excursion (p-p) 13.6 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 32 Hz Sensitivity (2.83V/1m) 93 dB Mechanical Q factor, Qms 5.43 Electrical Q factor, Qes 0.28 Total Q factor, Qts 0.27 Moving mass incl. air, Mms 16.2 g Force factor, Bl 6.3 Tm Equivalent volume, Vas 53.2 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.6 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Specifications 8 Ohm version: Nominal impedance 8 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.20 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.4 mm Air gap height 6 mm Linear coil excursion (p-p) 13.4 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 33 Hz Sensitivity (2.83V/1m) 90 dB Mechanical Q factor, Qms 6.47 Electrical Q factor, Qes 0.35 Total Q factor, Qts 0.33 Moving mass incl. air, Mms 15.6 g Force factor, Bl 7.5 Tm Equivalent volume, Vas 53.4 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.5 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions:
341,26 €*
Shipping: 0,00 €
Secure redirect to the provider
SB Acoustics Satori MW13TX / TeXtreme
The SB Acoustics SATORI MW13TX 5-inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 40 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Data 4 Ohm version: Nominal impedance 4 Ω Frequency range 60Hz - 5kHz DC resistance, Re 3.8 Ω Voice coil inductance, Le 0.16 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 38 Hz Sensitivity (2.83V/1m) 89 dB Mechanical Q factor, Qms 5.08 Electrical Q factor, Qes 0.27 Total Q factor, Qts 0.26 Moving mass incl. air, Mms 7.4 g Force factor, Bl 5.0 Tm Equivalent volume, Vas 16.0 liters Compliance, Cms 2.38 mm/N Mechanical loss, Rms 0.3 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Data 8 Ohm version: Nominal impedance 8 Ω Frequency range 60Hz - 5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.18 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 40 Hz Sensitivity (2.83V/1m) 87 dB Mechanical Q factor, Qms 4.99 Electrical Q factor, Qes 0.34 Total Q factor, Qts 0.32 Moving mass incl. air, Mms 7.3 g Force factor, Bl 5.7 Tm Equivalent volume, Vas 14.8 liters Compliance, Cms 2.19 mm/N Mechanical loss, Rms 0.4 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions
280,85 €*
Shipping: 0,00 €
Secure redirect to the provider
Similar search terms for SB-Acoustics-Satori-MW19TX
Top-Angebote
Products related to SB-Acoustics-Satori-MW19TX:
-
SB Acoustics Satori WO24TX / TeXtremeThe new SB Acoustics 9.5" Satori WO24TX-4 and WO24TX-8 TExtreme woofers with an increased nominal power of 90 W are an important enhancement to the Satori range, now offering extensive options for speaker designers. SB Acoustics was one of the first manufacturers of speaker chassis to announce the use of TExtreme materials for diaphragms and cones. Although SB Acoustics was not the first manufacturer of diaphragms made from TPCD material, it was likely the brand that contributed the most to the recognition and acceptance of these materials in the market. The fact that SB Acoustics introduced TExtreme-based drivers in its high-end audio series Satori developed by Danesian Audio was a clear sign of the performance that Frank Nielson and Ulrik Schmidt were able to achieve. Features Advanced TExtreme® cone for improved piston operation Large optimized motor system with undercut pole piece and double short-circuit rings Ventilated, aerodynamic aluminum die-cast chassis for optimal strength and low compression. Soft rubber damper with low damping for optimal settling behavior Linear-symmetric suspension for improved dynamic performance Non-conductive glass fiber coil carrier for minimal damping Durable silver conduits installed at a 180° offset for improved stability Ventilated foam piece for reduced compression Low ratio of piston to chassis diameter Sealing and bolt hole projections for reduced coupling to the speaker enclosure Data 4 Ω Variant Subwoofer Series Satori TExtreme Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 4 Ω Sensitivity 91 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 3.3 Ω Swinging coil induction (Le) 0.29 mH Resonant frequency (Fs) 26.3 Hz Mechanical Quality (Qms) 5.66 Electrical quality (Qes) 0.37 Total quality (Qts) 0.35 Moving mass (Mms) 42.8 g Suspension compliance (Cms) 0.86 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 7.9 Tm Equivalent volume (Vas) 79 liters Maximum deflection (Xmax) 8.75 mm Driver's Mechanical Losses (Rms) 1.25 kg/s Total depth 131.4 mm Data 8 Ω Variant Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 8 Ω Sensitivity 88 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 5.8 Ω Swinging coil induction (Le) 0.56 mH Resonant frequency (Fs) 24.5 Hz Mechanical Quality (Qms) 5.67 Electrical quality (Qes) 0.36 Total Quality (Qts) 0.34 Moving mass (Mms) 44.2 g Suspension compliance (Cms) 0.95 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 10.45 Tm Equivalent volume (Vas) 88 liters Maximum deflection (Xmax) 8.55 mm Driver's Mechanical Losses (Rms) 1.2 kg/s Outer diameter 242 mm Total depth 131.4 mm381,51 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DBAC76-3-DVThe SW26DBAC76-3-DV from SB Acoustics is a high-performance 10" (25cm) subwoofer designed for both home and car audio applications. This subwoofer features its unique, patented long-throw design and is capable of producing deep bass frequencies. Furthermore, the ventilated aluminum die-cast housing plays a key role in heat dissipation and reducing distortion. Not to be overlooked is the powerful neodymium motor system and the copper voice coil, which further contributes to its durability. A sophisticated item for audio enthusiasts. properties The SW26DBAC76-3-DV is a high-performance subwoofer suitable for both home and car audio applications. It features a long-throw design that allows it to produce deep bass frequencies, while the ventilated aluminum die-cast housing aids in heat dissipation and reduces distortion. Unique patented long-throw design with low depth Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum cone structure Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system SB Acoustics SW26DBAC76-3-DV Flat Subwoofer The SB Acoustics SW26DBAC76-3-DV Shallow Subwoofer is a flat subwoofer with a dual voice coil (2x 3 Ohm) and a 10-inch aluminum cone, along with a ventilated aluminum die-cast chassis. It features a unique, patented flat long-stroke design, a non-conductive fiberglass voice coil former for minimal damping, a short-circuit ring in the motor system for lower distortion, a copper voice coil for improved power handling, and durable, insulated silver cables. The subwoofer has a ventilated aluminum die-cast chassis for optimal strength and low compression. The SW26DBAC76-3-DV is a flat subwoofer that is ideal for applications where space is limited. The subwoofer is designed for a power of 300 W RMS, allowing it to handle even the most demanding audio applications. Additionally, the SW26DBAC76-3-DV has a frequency response of 19 Hz to 250 Hz, enabling it to reproduce a wide range of bass frequencies.311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DAC76-3-DVThe model SW26DAC76-3-DV from SB Acoustics is a 10" (25cm) mid-bass driver that stands out particularly due to its special features. A patented, unique, and flat design allows for a wide range and makes the speaker the optimal choice for tight spaces such as home theater systems or car audio systems. The subwoofer offers a dual voice coil for versatile applications with different amplifiers and is characterized by robust materials such as ventilated aluminum die-cast and rigid aluminum, which guarantee strength and stiffness while also supporting heat dissipation. properties Unique, patented, flat design with great range Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum membrane Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system Nominal impedance 2 x 3 Ω Direct current resistance, Re 2 x 2.4 Ω Effective membrane area, Sd 312 cm2 Winding coil diameter 75.5 mm Height of the vibrating coil 30 mm Height of air gap 6 mm Linear coil stroke (p-p) 24 mm Magnetic flux density 1.0 T Weight of the magnet 281 g Net weight 3.43 kg Free air resonance, Fs 19.5 Hz Sensitivity (2.83V/1m) 88/82 dB Mechanical Q-factor, Qms 5.96 Electrical Q-factor, Qes 0.29 Total Q factor, Qts 0.28 Moving mass including air, Mms 185 g Power factor, Bl (par./ser.) 9.7/19.4 Tm Equivalent volume, Vas 49.7 ltr. Compliance, Cms 0.36 mm/N Mechanical loss, Rms 3.8 kg/s Rated load capacity* 300 W311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen ALPHA 10 SBALPHA 10 SB is a 10-inch (25 cm) enclosed subwoofer from Gladen in a sealed enclosure design with a volume of 22 liters. It features a paper cone, Nomex spider, and steel basket. Impedance is 4 Ω and DC resistance is 2.7 Ω. Power handling is 150 to 250 watts. Chassis diameter is 25 cm and enclosure depth is 34 cm. Features 10-inch enclosed subwoofer Sealed enclosure Volume 22 liters Cone paper Spider Nomex Basket steel Impedance 4 Ω Technical Specifications Power handling 150 watts Power handling 250 watts DC resistance 2.7 Ω Chassis diameter 250 mm Enclosure depth 340 mm171,18 €*Shipping: 0,00 €Secure redirect to the provider
Gladen RS-X 08 SB
The Gladen RS-X 08 SB is an 8-inch (20 cm) Enclosed Subwoofer in a classic cabinet shape. The closed cabinet has a net volume of 14 liters. The nominal impedance is 4 ohms. The connection is made via a round push terminal. The cabinet measures 32.5 cm in width, 30.5 cm in height, and 20 to 26 cm in depth. The covering is black, and protective braces are included in the delivery. Features 8-inch (20 cm) Enclosed Subwoofer Classic cabinet shape Design: closed Passive Subwoofer Nominal impedance: 4 ohms Power handling: 250 watts Power handling: 375 watts Connection: round push terminal Covering: black Accessories: protective braces Technical Specifications Chassis diameter: 20 cm Cabinet width: 32.5 cm Cabinet height: 30.5 cm Cabinet depth: 20 to 26 cm Net volume: 14 liters
238,12 €*
Shipping: 0,00 €
Secure redirect to the provider
Nail HQ Nail Art Brush pinceau double embout ongles 1 pcs
Nail HQ Nail Art Brush, 1 pcs, Manucure pour femme, Élargissez vos possibilités et relookez vos ongles comme personne. Le produit Nail HQ Nail Art Brush vous aidera à réaliser des manucures dignes de pros à la maison. Il améliorera votre routine et complétera à merveille les outils ou les produits de beauté que vous utilisez déjà. Ce produit fera en sorte que vos ongles aient toujours une forme parfaite et une apparence soignée, et que vos mains soient votre plus belle carte de visite. Le produit : une application facile qui vous garantit des résultats rapides et précis idéal pour des soins manucures parfaits dimensions optimales qui garantissent une manipulation aisée Mode d’emploi : Respectez le manuel d’utilisation fourni. Utilisez selon les besoins.
4,23 €*
Shipping: 3,45 €
Secure redirect to the provider
Top-Angebote
Products related to SB-Acoustics-Satori-MW19TX:
-
SB Acoustics Satori MW19TX / TeXtremeThe SB Acoustics SATORI MW19TX 8 inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 30 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features: Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Specifications 4 Ohm version: Nominal impedance 4 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 3.4 Ω Voice coil inductance, Le 0.14 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.6 mm Air gap height 6 mm Linear coil excursion (p-p) 13.6 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 32 Hz Sensitivity (2.83V/1m) 93 dB Mechanical Q factor, Qms 5.43 Electrical Q factor, Qes 0.28 Total Q factor, Qts 0.27 Moving mass incl. air, Mms 16.2 g Force factor, Bl 6.3 Tm Equivalent volume, Vas 53.2 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.6 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Specifications 8 Ohm version: Nominal impedance 8 Ω Frequency range 80Hz - 3.5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.20 mH Effective diaphragm area, Sd 158 cm2 Voice coil diameter 39 mm Voice coil height 19.4 mm Air gap height 6 mm Linear coil excursion (p-p) 13.4 mm Magnetic flux density 1.1 T Magnet weight 0.15 kg Net weight 1.46 kg Free air resonance, Fs 33 Hz Sensitivity (2.83V/1m) 90 dB Mechanical Q factor, Qms 6.47 Electrical Q factor, Qes 0.35 Total Q factor, Qts 0.33 Moving mass incl. air, Mms 15.6 g Force factor, Bl 7.5 Tm Equivalent volume, Vas 53.4 liters Compliance, Cms 1.52 mm/N Mechanical loss, Rms 0.5 kg/s Nominal power handling* 70 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions:341,26 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics Satori MW13TX / TeXtremeThe SB Acoustics SATORI MW13TX 5-inch mid-woofer with patented TExtreme diaphragm is available in 4 Ohm and 8 Ohm versions. The ultra-light and extremely stable diaphragm is driven by a powerful neodymium motor. The resonance frequency around 40 Hz lies far outside the usable range, allowing the driver to perform extremely linearly within the usable range and making it ideal for 2-way use or as a woofer. The generously ventilated centering spider optimizes the rear compression behavior to a maximum and provides additional cooling. Features Advanced TExtreme® cone Ventilated, aerodynamic die-cast aluminum chassis Soft rubber surround with low damping Advanced BIMAX spider Powerful, optimized neodymium motor system with low distortion Extended copper sleeve on the pole shoe Non-conductive fiberglass voice coil former Ventilated pole shoe and voice coil Lightweight CCAW voice coil Durable silver wires Data 4 Ohm version: Nominal impedance 4 Ω Frequency range 60Hz - 5kHz DC resistance, Re 3.8 Ω Voice coil inductance, Le 0.16 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 38 Hz Sensitivity (2.83V/1m) 89 dB Mechanical Q factor, Qms 5.08 Electrical Q factor, Qes 0.27 Total Q factor, Qts 0.26 Moving mass incl. air, Mms 7.4 g Force factor, Bl 5.0 Tm Equivalent volume, Vas 16.0 liters Compliance, Cms 2.38 mm/N Mechanical loss, Rms 0.3 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Data 8 Ohm version: Nominal impedance 8 Ω Frequency range 60Hz - 5kHz DC resistance, Re 6.0 Ω Voice coil inductance, Le 0.18 mH Effective diaphragm area, Sd 70 cm2 Voice coil diameter 30.5 mm Voice coil height 15 mm Air gap height 5 mm Linear coil excursion (p-p) 10 mm Magnetic flux density 1.08 T Magnet weight 0.1 kg Net weight 0.79 kg Free air resonance, Fs 40 Hz Sensitivity (2.83V/1m) 87 dB Mechanical Q factor, Qms 4.99 Electrical Q factor, Qes 0.34 Total Q factor, Qts 0.32 Moving mass incl. air, Mms 7.3 g Force factor, Bl 5.7 Tm Equivalent volume, Vas 14.8 liters Compliance, Cms 2.19 mm/N Mechanical loss, Rms 0.4 kg/s Nominal power handling* 40 W * IEC 268-5, T/S parameters measured on broken-in drivers. Dimensions280,85 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics Satori WO24TX / TeXtremeThe new SB Acoustics 9.5" Satori WO24TX-4 and WO24TX-8 TExtreme woofers with an increased nominal power of 90 W are an important enhancement to the Satori range, now offering extensive options for speaker designers. SB Acoustics was one of the first manufacturers of speaker chassis to announce the use of TExtreme materials for diaphragms and cones. Although SB Acoustics was not the first manufacturer of diaphragms made from TPCD material, it was likely the brand that contributed the most to the recognition and acceptance of these materials in the market. The fact that SB Acoustics introduced TExtreme-based drivers in its high-end audio series Satori developed by Danesian Audio was a clear sign of the performance that Frank Nielson and Ulrik Schmidt were able to achieve. Features Advanced TExtreme® cone for improved piston operation Large optimized motor system with undercut pole piece and double short-circuit rings Ventilated, aerodynamic aluminum die-cast chassis for optimal strength and low compression. Soft rubber damper with low damping for optimal settling behavior Linear-symmetric suspension for improved dynamic performance Non-conductive glass fiber coil carrier for minimal damping Durable silver conduits installed at a 180° offset for improved stability Ventilated foam piece for reduced compression Low ratio of piston to chassis diameter Sealing and bolt hole projections for reduced coupling to the speaker enclosure Data 4 Ω Variant Subwoofer Series Satori TExtreme Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 4 Ω Sensitivity 91 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 3.3 Ω Swinging coil induction (Le) 0.29 mH Resonant frequency (Fs) 26.3 Hz Mechanical Quality (Qms) 5.66 Electrical quality (Qes) 0.37 Total quality (Qts) 0.35 Moving mass (Mms) 42.8 g Suspension compliance (Cms) 0.86 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 7.9 Tm Equivalent volume (Vas) 79 liters Maximum deflection (Xmax) 8.75 mm Driver's Mechanical Losses (Rms) 1.25 kg/s Total depth 131.4 mm Data 8 Ω Variant Nominal diameter 9.5" Load capacity (QMW) 90 W Impedance (Z) 8 Ω Sensitivity 88 dB Winding coil diameter 49.5 mm Direct current resistance (Re) 5.8 Ω Swinging coil induction (Le) 0.56 mH Resonant frequency (Fs) 24.5 Hz Mechanical Quality (Qms) 5.67 Electrical quality (Qes) 0.36 Total Quality (Qts) 0.34 Moving mass (Mms) 44.2 g Suspension compliance (Cms) 0.95 mm/N Membrane area (Sd) 255 cm2 Power factor (BL) 10.45 Tm Equivalent volume (Vas) 88 liters Maximum deflection (Xmax) 8.55 mm Driver's Mechanical Losses (Rms) 1.2 kg/s Outer diameter 242 mm Total depth 131.4 mm381,51 €*Shipping: 0,00 €Secure redirect to the provider
-
SB Acoustics SW26DBAC76-3-DVThe SW26DBAC76-3-DV from SB Acoustics is a high-performance 10" (25cm) subwoofer designed for both home and car audio applications. This subwoofer features its unique, patented long-throw design and is capable of producing deep bass frequencies. Furthermore, the ventilated aluminum die-cast housing plays a key role in heat dissipation and reducing distortion. Not to be overlooked is the powerful neodymium motor system and the copper voice coil, which further contributes to its durability. A sophisticated item for audio enthusiasts. properties The SW26DBAC76-3-DV is a high-performance subwoofer suitable for both home and car audio applications. It features a long-throw design that allows it to produce deep bass frequencies, while the ventilated aluminum die-cast housing aids in heat dissipation and reduces distortion. Unique patented long-throw design with low depth Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum cone structure Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system SB Acoustics SW26DBAC76-3-DV Flat Subwoofer The SB Acoustics SW26DBAC76-3-DV Shallow Subwoofer is a flat subwoofer with a dual voice coil (2x 3 Ohm) and a 10-inch aluminum cone, along with a ventilated aluminum die-cast chassis. It features a unique, patented flat long-stroke design, a non-conductive fiberglass voice coil former for minimal damping, a short-circuit ring in the motor system for lower distortion, a copper voice coil for improved power handling, and durable, insulated silver cables. The subwoofer has a ventilated aluminum die-cast chassis for optimal strength and low compression. The SW26DBAC76-3-DV is a flat subwoofer that is ideal for applications where space is limited. The subwoofer is designed for a power of 300 W RMS, allowing it to handle even the most demanding audio applications. Additionally, the SW26DBAC76-3-DV has a frequency response of 19 Hz to 250 Hz, enabling it to reproduce a wide range of bass frequencies.311,05 €*Shipping: 0,00 €Secure redirect to the provider
Similar search terms for SB-Acoustics-Satori-MW19TX
-
SB Acoustics SW26DAC76-3-DVThe model SW26DAC76-3-DV from SB Acoustics is a 10" (25cm) mid-bass driver that stands out particularly due to its special features. A patented, unique, and flat design allows for a wide range and makes the speaker the optimal choice for tight spaces such as home theater systems or car audio systems. The subwoofer offers a dual voice coil for versatile applications with different amplifiers and is characterized by robust materials such as ventilated aluminum die-cast and rigid aluminum, which guarantee strength and stiffness while also supporting heat dissipation. properties Unique, patented, flat design with great range Ventilated aluminum die-cast chassis for optimal strength and low compression Double rigid aluminum membrane Non-conductive fiber optic spool carrier for minimal attenuation Short-circuit ring in the motor system for reduced distortions Copper coil for improved load capacity Double oscillating coil Durable insulated silver wires Powerful neodymium motor system Nominal impedance 2 x 3 Ω Direct current resistance, Re 2 x 2.4 Ω Effective membrane area, Sd 312 cm2 Winding coil diameter 75.5 mm Height of the vibrating coil 30 mm Height of air gap 6 mm Linear coil stroke (p-p) 24 mm Magnetic flux density 1.0 T Weight of the magnet 281 g Net weight 3.43 kg Free air resonance, Fs 19.5 Hz Sensitivity (2.83V/1m) 88/82 dB Mechanical Q-factor, Qms 5.96 Electrical Q-factor, Qes 0.29 Total Q factor, Qts 0.28 Moving mass including air, Mms 185 g Power factor, Bl (par./ser.) 9.7/19.4 Tm Equivalent volume, Vas 49.7 ltr. Compliance, Cms 0.36 mm/N Mechanical loss, Rms 3.8 kg/s Rated load capacity* 300 W311,05 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen ALPHA 10 SBALPHA 10 SB is a 10-inch (25 cm) enclosed subwoofer from Gladen in a sealed enclosure design with a volume of 22 liters. It features a paper cone, Nomex spider, and steel basket. Impedance is 4 Ω and DC resistance is 2.7 Ω. Power handling is 150 to 250 watts. Chassis diameter is 25 cm and enclosure depth is 34 cm. Features 10-inch enclosed subwoofer Sealed enclosure Volume 22 liters Cone paper Spider Nomex Basket steel Impedance 4 Ω Technical Specifications Power handling 150 watts Power handling 250 watts DC resistance 2.7 Ω Chassis diameter 250 mm Enclosure depth 340 mm171,18 €*Shipping: 0,00 €Secure redirect to the provider
-
Gladen RS-X 08 SBThe Gladen RS-X 08 SB is an 8-inch (20 cm) Enclosed Subwoofer in a classic cabinet shape. The closed cabinet has a net volume of 14 liters. The nominal impedance is 4 ohms. The connection is made via a round push terminal. The cabinet measures 32.5 cm in width, 30.5 cm in height, and 20 to 26 cm in depth. The covering is black, and protective braces are included in the delivery. Features 8-inch (20 cm) Enclosed Subwoofer Classic cabinet shape Design: closed Passive Subwoofer Nominal impedance: 4 ohms Power handling: 250 watts Power handling: 375 watts Connection: round push terminal Covering: black Accessories: protective braces Technical Specifications Chassis diameter: 20 cm Cabinet width: 32.5 cm Cabinet height: 30.5 cm Cabinet depth: 20 to 26 cm Net volume: 14 liters238,12 €*Shipping: 0,00 €Secure redirect to the provider
-
Nail HQ Nail Art Brush pinceau double embout ongles 1 pcsNail HQ Nail Art Brush, 1 pcs, Manucure pour femme, Élargissez vos possibilités et relookez vos ongles comme personne. Le produit Nail HQ Nail Art Brush vous aidera à réaliser des manucures dignes de pros à la maison. Il améliorera votre routine et complétera à merveille les outils ou les produits de beauté que vous utilisez déjà. Ce produit fera en sorte que vos ongles aient toujours une forme parfaite et une apparence soignée, et que vos mains soient votre plus belle carte de visite. Le produit : une application facile qui vous garantit des résultats rapides et précis idéal pour des soins manucures parfaits dimensions optimales qui garantissent une manipulation aisée Mode d’emploi : Respectez le manuel d’utilisation fourni. Utilisez selon les besoins.4,23 €*Shipping: 3,45 €Secure redirect to the provider
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.